[Canberrauav] progress on bushmaster mkII
Andrew Tridgell tridge at samba.org 
Sat May 31 16:20:08 EST 2014 

Hi All,

We made quite a bit of progress over the last 3 days on rebuilding the
bushmaster. What we have done so far:

  - built spar boxes for wings
  - fitted spacers in wings
  - cut out servo holes in wings, and fitted ply servo mounts
  - cut out airspeed sensor hole in wing, and fitted mount
  - cut out end pieces for wings
  - cut out fuselage end-pieces (where fuselage sections join)
  - setup jig for aileron/flap hinging
  - bought glass matting and resin ready for glassing
  - cut out foam cores for spare wings (4 spares)
  - ate plenty of pizza, cheese on toast and drank coffee

The build it certainly progressing much faster than last time, thanks to
everyone who has helped!

Jack and I will be at CMAC tomorrow morning, then we will probably do
some more building at Jacks place in the afternoon.

Cheers, Tridge

Copyright 2014 http://canberrauav.org.au/