Proposed EIA/TIA Interim Standard

Wideband Spread Spectrum Digital Cellular System Dual-Mode Mobile Station - Base Station Compatibility Stantard

April 21, 1992

Preface

Overview

1. General

This section defines the terms and numeric indications used in this document. This section also describes the time reference used in the CDMA system and the tolerances used throughout the document. See document [PDF]

2. Requirements for Mobile Station Analog Operation

This section describes the requirements for CDMA-analog dual-mode mobile stations operating in the analog mode. A mobile station complying with these requirements will be able to operate with analog base stations complying with EIA/TIA-553, EIA/TIA/IS-54, and this document. Document not available

3. Requirements for Base Station Analog Operation

This section describes the requirements for analog base stations. A base station complying with these requirements will be able to operate in the analog mode with mobile stations complying with EIA/TIA-553, EIA/TIA/IS-54, and this document. Document not available

4. Requirements for Mobile Station Analog Options

This section describes the requirements for CDMA-analog dual-mode mobile stations which use the 32-digit dialing option on the reverse analog control channel. In addition, this section describes mobile station requirements for use of the optional extended protocol. Document not available

5. Requirements for Base Station Analog Options

This section describes the base station requirements for using the 32-digit dialing option on the reverse analog control channel. In addition, this section describes base station requirements for use of the optional extended protocol. Document not available

6. Requirements for Mobile Station CDMA Operation

This section describes the requirements for CDMA-analog dual-mode mobile stations operating in the CDMA mode. A mobile station complying with these requirements will be able to operate with CDMA base stations complying with this document. See document [PDF]

7. Requirements for Base Station CDMA Operation

This section describes the requirements for CDMA base stations. A base station complying with these requirements will be able to operate in the CDMA mode with mobile stations complying with this document. See document [PDF]

Appendix A. Requirements for CDMA Service Options

This appendix describes the requirements for specific CDMA service options. Service Option 1, described herein, supports two-way voice using a variable-rate vocoder. See document [PDF]

Appendix B. CDMA Call Flow Examples

This appendix provides examples of simple call flow in the CDMA system. See document [PDF]

Appendix C. CDMA System Layering

This appendix describes the layers of the CDMA system: the physical layer (layer 1), the link layer (layer 2), the multiplex sublayer, and the control process layer (layer 3). See document [PDF]

Appendix D. CDMA Constants

This appendix contains tables that give specific values for the constant identifiers found in Section 6 and Section 7. These identifiers take the forms T 20m and N5m . The subscripted numbers vary to identify the particular constant. See document [PDF]

Appendix E. CDMA Retrievable and Settable Parameters

This appendix describes the parameters that the base station can set and retrieve in the mobile station. See document [PDF]

Appendix F. Mobile Station Database

This appendix describes a database model that can be used for dual-mode mobile stations complying with this document. See document [PDF]