[Canberrauav] progress on bushmaster mkII Andrew Tridgell tridge at samba.org Sat May 31 16:20:08 EST 2014 Hi All, We made quite a bit of progress over the last 3 days on rebuilding the bushmaster. What we have done so far: - built spar boxes for wings - fitted spacers in wings - cut out servo holes in wings, and fitted ply servo mounts - cut out airspeed sensor hole in wing, and fitted mount - cut out end pieces for wings - cut out fuselage end-pieces (where fuselage sections join) - setup jig for aileron/flap hinging - bought glass matting and resin ready for glassing - cut out foam cores for spare wings (4 spares) - ate plenty of pizza, cheese on toast and drank coffee The build it certainly progressing much faster than last time, thanks to everyone who has helped! Jack and I will be at CMAC tomorrow morning, then we will probably do some more building at Jacks place in the afternoon. Cheers, Tridge
Copyright 2014 http://canberrauav.org.au/